MIL-DTL-83526C
4.5.4 Retention of qualification. To retain qualification, the manufacturer shall verify in coordination
with the qualifying activity, the capability of manufacturing products which meet the performance
requirements of this specification. Refer to the qualifying activity for the guidelines necessary to retain
qualification with respect to this particular specification. The manufacturer shall immediately notify the
qualifying activity at any time that the inspection data indicates failure of the qualified product to meet the
performance requirements of this specification.
4.6 Materials inspection. Materials inspection shall consist of certification supported by verifying data
that materials used in fabricating the delivered fiber-optic connectors are in accordance with the
4.7 Conformance inspection. Conformance inspection shall consist of the inspections and optical tests
specified for group A inspection (table IV), group B inspection (table V), group C inspection (table VI), and
packaging inspection.
4.7.1 Inspection of product for delivery. Inspection of product for delivery shall consist of groups A and
B inspections.
4.7.1.1 Inspection lot. The inspection lot shall consist of the number of connectors offered for
inspection at one time, and all of the same design as covered by one specification sheet.
4.7.1.2 Group A inspection. Group A inspection shall consist of the inspections and optical tests
specified in table IV. All connectors, backshells, and accessories of the inspection lot shall be subjected
to the inspections and optical tests listed.
4.7.1.2.1 Sampling plan. Group A inspection shall be performed on 100 percent of the delivered
product.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business