MIL-PRF-29504/4D
(2)
Manufacturers who qualify under this specification sheet for termini with one style of cable
strain relief capture mechanism and pass the insertion loss, cable pullout, thermal shock,
temperature life and insertion and removal force verification are qualified under this
specification sheet for a different cable strain relief capture mechanism. Insertion and
removal verification of the termini to and from the connector shall be performed, with the
termini on the ends of single fiber cable; to verify that strain relief is compatible with tools in
table II.
(3)
Constraint for qualification by similarity case listed above. This qualification by similarity
case is valid if the only difference between the qualified termini and the termini undergoing
qualification is a different cable strain relief capture mechanism and TICC markings.
d. Qualification of termini for change in design or material.
Perform complete re-qualification.
Cleaning prior to packaging. Termini shall be cleaned prior to packaging/shipment internally (for
ensuring proper adherence of epoxy to terminus barrel (body) and ferrule and externally (for minimizing
contamination).
Referenced documents. In addition to MIL-PRF-29504, this specification sheet references the following
documents
MIL-PRF-29504/5
MIL-S-901
TIA-455-14
MIL-DTL-38999
NAVSEA drawing 8283255
TIA/EIA-455-16
MIL-DTL-38999/60
SAE AIR 1351
TIA/EIA-455-71
MIL-DTL-38999/61
TIA/EIA-455-4
Marginal notations are not used in this revision to identify changes with respect to the previous issue due
to the extent of the changes.
Custodians:
Preparing activity:
Army - CR
DLA - CC
Navy - SH
Air Force 11
(Project 6060-2006-019)
DLA - CC
Review activities:
Navy - AS
Air Force - 13, 19, 93, 99
NASA - NA
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business