MIL-PRF-24623C
HANDBOOKS
MILITARY
MIL-HDBK-454
-
General Guidelines for Electronic Equipment.
(Unless otherwise indicated, copies of above specifications, standards, and handbooks
are available from the Standardization Documents Order Desk, Building 4D, 700 Robbins
Avenue, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following document(s) form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of the
documents which are DoD adopted are those listed in the issue of the DoDISS cited in
the solicitation. Unless otherwise specified, the issues of documents not listed in
the DoDISS are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-E-595
-
Standard Test
Methods for Total Mass Loss and Collected Volatile Condensable
Materials from Outgassing in a Vacuum Environment (DoD
adopted).
ASTM-D-1141
-
Standard Specification for Substitute Ocean Water (DoD
adopted).
(Application for copies should be addressed to the American Society for Testing and
Materials, 100 Bar Harbor Drive, Conshohocken, PA 19428-2959.)
ELECTRONIC INDUSTRIES ASSOCIATION (EIA)
EIA-364-81
-
Combustion Characteristics of Connector Housings, Connector
Assemblies and Sockets.
TIA/EIA-455
-
Standard Test Procedures for Fiber Optic Fibers, Cables,
Transducers, Connecting and Terminating Devices (DoD adopted).
TIA/EIA-455-1
-
Cable Flexing for Fiber Optic Interconnecting Devices.
TIA/EIA-455-2
-
Impact Test Measurements for Fiber Optic Devices (DoD adopted).
EIA/TIA-455-3
-
Procedure to Measure Temperature Cycling Effects on Optical
Fibers, Optical Cable, and Other Passive Fiber Optic Components
(DoD adopted).
TIA/EIA-455-4
-
Fiber Optic Connector/Component Temperature Life Test (DoD
adopted).
TIA/EIA-455-5
-
Humidity Test Procedure for Fiber Optic Components (DoD
adopted).
EIA/TIA-455-6
-
Cable Retention Test Procedure for Fiber Optic Cable
Interconnecting Devices (DoD adopted).
TIA/EIA-455-11
-
Vibration Test Procedure for Fiber Optic Components and Cables.
EIA/TIA-455-12
-
Fluid Immersion Test for Fiber Optic Components.
EIA/TIA-455-13
-
Visual and Mechanical Inspection of Fiber Optic Components,
Devices, and Assemblies (DoD adopted).
EIA/TIA-455-16
-
Salt Spray (Corrosion) Test for Fiber Optic Components (DoD
adopted).
TIA/EIA-455-20
-
Measurement of Change in Optical Transmittance (DoD adopted).
EIA/TIA-455-22
-
Ambient Light Susceptibility of Fiber Optic Components (DoD
adopted).
TIA/EIA-455-26
-
Crush Resistance of Fiber Optic Interconnecting Devices (DoD
adopted).
TIA/EIA-455-32
-
Fiber Optic Circuit Discontinuities (DoD adopted).
TIA/EIA-455-34
-
Interconnection Device Insertion Loss Test (DoD adopted).
EIA/TIA-455-35
-
Fiber Optic Component Dust (Fine Sand) Test (DoD adopted).
TIA/EIA-455-36
-
Twist Test for Fiber Optic Connecting Devices.
TIA/EIA-455-42
-
Optical Crosstalk in Fiber Optic Components (DoD adopted).
TIA/EIA-455-56
-
Test Method for Evaluating Fungus Resistance of Optical
Waveguide Fibers and Cables (DoD adopted).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business