MIL-DTL-83522E
NATIONAL AERONAUTICAL AND SPACE ADMINISTRATION (NASA)
Flammability, Odor, Off-gassing, and Compatibility Requirements and Test Procedures for
Materials in Environments That Support Combustion
(Copies of this document are available online at https://www.nasa.gov/centers/johnson/home/ or the NASA Johnson Space Center
2101 NASA Parkway Houston, Texas 77058.)
2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
ASTM INTERNATIONAL
General Requirements for Stainless and Heat-Resisting Wrought Steel Products (Except Wire).
Free-Machining Stainless and Heat-Resisting Steel Bars, Hot-Rolled or Cold-Finished.
Rod, Brass, Free-Cutting, Bar and Shapes for use in Screw Machines
Plate, Brass, Sheet, Strip, and Rolled Bar
Standard Specification for Substitute Ocean Water.
Standard Specification for Polychlorotrifluro-ethylene (PCTFE) Plastics.
Standard Specification for FEP Fluorocarbon Molding and Extrusion Materials.
Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
Total Mass Loss and Collected Volatile Condensable Materials From Outgassing in a Vacuum
Environment.
(Copies of these documents are available online at https://www.astm.org or from ASTM International, P.O. Box C700, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959.)
ELECTRONIC COMPONENTS INDUSTRY ASSOCIATION (ECIA)
Electrical Connector/Socket Test Procedures Including Environmental Classifications
Combustion Characteristics Test Procedure for Electrical Connector Housings, Connector
Assemblies and Sockets.
(Copies of these documents are available online at https://www.eciaonline.org or from ECIA, 1111 Alderman, Suite 400, Alpharetta,
GA 30005.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
Measurement Management Systems - Requirements for Measurement Processes and Measuring
Equipment - First Edition
rd
(Copies of this document are available online at www.ansi.org of from the ANSI Customer Service Department, 25 W. 43 Street,
th
4 floor, New York, NY 10036.)
SAE INTERNATIONAL
Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled,Drawn, or Cold
Finished; General Specification For
Steel Bars, Wire, Shapes, and Forgings, Corrosion-Resisting.
Passivation of Corrosion Resistant Steels.
(Copies of these documents are available online at https://www.sae.org or from the SAE World Headquarters, 400 Commonwealth
Drive, Warrendale, PA 15096-0001.)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business