MIL-PRF-29504/15A
Inches
mm
.074
1.88
.0787
1.999
.0788
2.002
.080
2.03
.114
2.90
.115
2.92
.118
3.00
.158
4.01
.267
6.78
.277
7.04
.755
19.18
.800
20.32
.955
24.26
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. All diameters are to be concentric within 0.002 inch (0.05 mm).
4. Dimensions apply to plated/finished part.
5. Dimension .277 inch (7.04 mm) or .267 inch (6.78 mm) is to be measured
when installed in connector equivalent gauge fixture and when subjected
to minimal compressive force. See figure 3.
6. The TICC bands shall be at the rear of the socket terminus.
7. The .755 (19.18 mm) dimension is a maximum for the short terminus.
8. The TICC bands shall not appear on the short terminus. The individual
bag or container shall have either TICC bands or the equivalent MIL-PRF-
29504 Part or Identifying Number (PIN) marking on container or on a tag
inside the container.
9. Exposed end of ferrule is to be a minimum of .156 inch (3.96 mm) in
length.
10. All terminus metal parts are to be corrosion resistant. Crimp sleeve is
to be metal.
11. Terminus shown with flat end face. Radiused end faces are also
permissible.
12. The dimension shown is effective prior to the application of the TICC
band marking.
13. Crimp grooves are permissible on the crimp diameter.
FIGURE 1.
Socket terminus - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business