MIL-PRF-29504/1B
Inches
mm
||
Inches
mm
.0833
2.116
||
.114
2.90
.0837
2.126
||
.118
3.00
.084
2.13
||
.332
8.43
.090
2.29
||
.350
8.89
.102
2.59
||
.850
21.59
NOTES:
1. These are unmated dimensions and will decrease 0.40 in (10.2 mm) as
springs compress during mating.
2. Dimensions are in inches.
3. Metric equivalents are given for general information only, except for
guide bushing "A" diameter which is based upon 1.00 inch = 25400.0 µm or
1.0 µm = .00003937 inch.
4. All diameters to be concentric within 0.002 inch (0.05 mm).
5. Dimensions apply after plating.
6. For internal configuration and dimensions of terminus rear, see figure 2.
7. The TICC bands shall be at the rear of the pin terminus.
8. Dimensions to be measured with terminus installed in connector insert or
equivalent gauge fixture.
FIGURE 1.
Pin terminus - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business