MIL-C-83522/1F
Min
Max
K dimensions
50/125 µm
62.5/125 µm
100/140 µm
A
.3858 (9.799)
.3863 (9.812)
fiber
fiber
fiber
C
.080 (2.03)
.100 (2.54)
.1300 max
.1300 max
.1450 max
D
.179 (4.55)
.182 (4.62)
.1275 min
.1275 min
.1425 min
E
.220 (5.59)
.233 (5.92)
F
.485 (12.32)
---
G
.183 (4.65)
.244 (5.69)
Inches
mm
Inches
mm
.001
0.02
.0625
1.588
H
---
.150 (38.1)
.002
0.05
.0847
2.151
J
.015 (0.38)
.045 (1.14)
.005
0.13
.0850
2.159
B
Plug must not
Plug must enter
.010
0.25
.090
2.29
enter .118 hole
.124 dia. hole
.015
0.38
.123
3.12
gauge
gauge
.024
0.61
.124
3.15
.028
0.71
.127
3.23
.030
0.76
.131
3.33
.036
0.91
.250
6.35
.046
1.17
.309
7.85
.060
1.52
.315
8.00
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Millimeters are in parentheses.
4. Dimensions for fiber optic cable shall be in accordance with MIL-PRF-85045.
5. K dimension is specified in micrometer. This dimension is critical to fiber alignment. Dimensions for fiber
optic fiber shall be in accordance with MIL-PRF-49291.
6. Dimension A is obtained after product has been assembled.
7. Ferrule may be an integral part of component.
8. One full length sleeve to be used in conjunction with two step-down nose connectors.
9. One-half length sleeve to be used in conjunction with one step-down nose connector and one receptacle
(active device).
10. O-ring is required. Component shall be machined for either O-ring location A or location B.
11. Dimension of O-ring area.
FIGURE 1. Dimensions and configuration - Continued.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business